This procedure is aimed at Windows computers, but the procedure should be similar on a Mac. This step will vary depending on the type of dashcam you own. Just make sure your car is parked and that the dashcam is turned OFF before removing the memory card.
This step only applies to Micro SD cards. Some memory card readers can accept the Micro SD card directly and don't need the adapter. If your computer does not have a built-in card reader, you will need to use a USB Memory Card Reader see 2nd picture below :. Physically insert the memory card or adapter containing the card into the correct slot on the memory card reader.
Once the memory card is inserted, after a few moments an "AutoPlay" window should pop up. Select the option to "Open folder to view files". Screen Display — Dash cams may or may not have a display screen to view footage. Some of the smaller dash cams do not contain a screen and it is not necessary for your protection as you can still transfer the data to be viewed on a separate device. However, a screen display can be useful in the event of an accident as some devices can be removed from the vehicle and used to show other parties including the Police exactly what has occurred.
Processor — The processor determines the performance of the central processing unit CPU of the camera. While the processor is important, the quality of the complementary metal oxide semiconductor CMOS sensor and lens are equally vital. As a result different dash cams, with the same processor, can have a significant difference in picture quality. Lane Departure Warning System — In road-transport terminology, a lane departure warning system is a mechanism designed to warn a driver when the vehicle begins to move out of its lane unless a turn signal is on in that direction on freeways and arterial roads.
These systems are designed to minimize accidents by addressing the main causes of collisions: driver error, distractions and drowsiness. Uniden Dashcams. Product Registration Register Now. Product Documents Learn More.
Download the firmware data file onto your Micro SD Card. Remove the Micro SD Card from the reader. Power On the Vehicle. The install will automatically start. The unit will Power Off once completed.
Power ON and reset the date and time. Firmware update completed and should show version V Shop Products Dashcams Shop Now. Download the firmware to your computer.
Unzip the file to a folder on your computer. Remove the microSD card from the AppCam. Insert the microSD card into your computer an adapter may be necessary. Copy the firmware to the root directory of your microSD card. Eject the microSD card and place back into your AppCam.
Connect the power to your AppCam. The AppCam will install the firmware. Note: It may be necessary to perform the initial setup again for the AppCam and your mobile phone application.
0コメント